Quite frankly, it wasn't until I faced an unexpected battle with cancer that my priorities completely shifted, and I learned to develop blind spots towards the areas in my home I had wanted to change and simply focus on enjoying the people in our home instead. Now that we finally have a chance to make changes in our home, we've been able to think long and hard about each decision and go into the project with a healthy attitude, understanding that this renovation is a fun thing we get to do to make our home prettier, but it's the food and fellowship that really makes our kitchen a wonderful place to be.
The biggest change our kitchen underwent was the refinishing of the cabinets. I can't believe how different this space feels and the amount of light that bounces around in there now! It's like a whole new kitchen!
Now that I'm looking at these before and after photos, I can't believe I even questioned refinishing our cabinets! We saved so much money by keeping our current cabinetry, but the refinishing definitely breathed new life into our entire kitchen. Check out our process below, and I'll share some tips too!
Selecting a Paint Finish
I knew that I wanted a darker color on the bottom and white on the top of my cabinets, because I liked the interest that the difference in color adds to a space and was really itching to bring more light into our dreary kitchen. But I wasn't sure what kind of paint to get. I was worried about getting a high-gloss paint because of brush strokes showing more easily with the reflected light, but I liked the idea of the cabinets being really easy to wipe clean with a semi-gloss finish. Plus, I'll take all the reflected light I can get.
In the end, I decided to get Benjamin Moore's ADVANCE paint because it's so thick and settles nicely after brushing, so that brush strokes become less noticeable than they would be with a lower quality paint. Because we were spray painting the doors, and there would be no brush or roller texture to be seen on them, I had no qualms about getting a semi-gloss paint finish. I can attest to the fact that they're very easy to wipe clean, though I'll warn you that fingerprints show up so easily, so we're cautious about closing the doors using the knobs instead of our hands.
The top cabinets have untinted white paint, and the lower cabinets have Benjamin Moore's Black Panther, which is like a dark charcoal gray, but not quite black. I decided having no color on the cabinets would age the best and work with any color scheme in the future. Sure, yellow was tempting, but I'm glad I kept it safe with the Black Panther! And the whiteOh, it's so bright and beautiful!
Something that I didn't do in our project, that I wish I would have, was to create a timeline. We had friends and family help out at times, and when they were contributing their own tools to the project, it was a little frustrating waiting days to pick up where we left off because of waiting for their availability. You know the old saying, beggars can't be choosers? It's so true! But I think that my own sanity would have benefited from creating a schedule for work days and what we had planned to accomplish. Our entire kitchen was ripped apart, so in between work days, it was hard to do anything in our home, much less eat anything. If we had consulted with helpers to see their availability and coordinated with them to create a schedule, I'm sure I would have had a much better time with the process, looking at a schedule and seeing an end in sight, and also knowing for sure that people knew which days they were going to be coming over to help, and I could count on it.
Here's how we ordered each aspect of the cabinet refinishing:
Day One: Empty cabinets and drawers and organize contents into boxes and onto folding tables throughout the houseThis took one evening with two people.
Day Two: Take down upper cabinets (optional), remove cabinet doors and drawers, remove hardware, sand away the previous finish, fill holes and chips with wood filler, let wood filler dry, sand down again, do another coat of wood filler, then sand again until smoothThis took one long afternoon and late night with three people.
Day Three: Taping off the drawer sides and insides, spray painting with primer, wet sanding the primer, and adding another coat of primer to all doors and drawersThis took one morning and afternoon with two people.
Day Four: Taping off the inside of the lower cabinets, priming the cabinet faces with two coats of primer, and painting with two coats of paintThis took one evening and late into the night with two people, primarily waiting for paint to dry between coats.*
Day Five: Spray painting two coats of paint on all the doors and drawers and moving inside the garage to dry on wax paperThis took one morning and afternoon with two people.
Day Six: Hanging upper cabinets and adding new hardware to doors and drawersThis took one evening with three people.
Day Seven: Hanging doors with new hingesThis took one evening with two people. We also had old latches to add inside the cabinet doors.
*It's important to allow one week after painting before hanging doors and replacing drawers. If you use them before the paint has cured, I guarantee you will have something stick to the paint and then pull it away, ruining your fresh paint job!
Materials:
-1 gallon tinted primer (to use under dark paint)
-1 gallon regular primer
-1 gallon untinted, white semi-gloss paint (Benjamin Moore's ADVANCE)
-1 gallon Benjamin Moore's ADVANCE Black Panther semi-gloss paint
-sandpaper120 grit, 180 grit, and 400 grit wet/dry
-latex wood filler
Tools:
-rags
-buckets
-palm sander
-spray gun (borrowed from my dad)
-air compressor (borrowed from my father-in-law)
-power drill with drill bits
-breathing masks
To prepare the cabinets for painting, we removed all of the doors, drawers, and hardware and sanded off the finish of the wood. I used 120 then 180 grit sandpaper for this, ending up with smooth, raw wood ready for priming.
Because I planned to replace the hardware, I filled in all of the door knob holes. To do this, I applied wood filler with my finger, shoving it deep into the holes on the front and back of the doors, then smoothed away the excess wood filler with a damp rag. When it dried completely, I sanded the area that was filled with 180 grit sandpaper. Most areas needed additional wood filler because of shrinkage into the holes, so I repeated the process until the surface was perfectly smooth and undimpled.
The drawers were using new hardware that matched the holes from the old hardware, so thankfully we didn't have to fill in any drawer holes! But we did use masking paper and masking tape to protect the area around the door face from paint. We figured, why waste paint on doing the whole drawer when you only see the face?
After all of the drawers and doors were prepared for painting, it was time for the fun to begin! We had two people working (my dad and me), with one spray painting and the other one setting up sawhorses and lumber to create a drying area. I moved drawers and doors that were ready to be painted or freshly painted while my dad sprayed them. We worked on a warm, sunny day, so the paint dried quickly.
After the primer had set up, I got to work on wet sanding them. Wet sanding is an important step in painting that is a bit tedious, but definitely worth it! When priming, the little hairs of the wood become raised, giving a bit of a rough and bumpy texture to the finish of the wood, even though it has been sanded prior to painting. Wet sanding knocks down that rough texture while simultaneously smoothing out that grainy texture that shows through when painting over wood. It leaves you with an unbelievably silky surface for the final coats of paint.
I used 400 grit wet/dry sandpaper in the sheets shown in the image below. I cut the sheets into quarters so they were more manageable. Then I would dunk the sandpaper into the water and rub the primed surface with plenty of water to go around. Then I would dunk the sandpaper back into the water to keep the paint from clogging up the sandpaper. One quarter sheet of sandpaper usually would last me through two doors or three drawers.
After wet sanding, the primer on the corners and edges of the wood had been sanded off, so we gave the doors and drawers another coat of primer after they had been rinsed and dried.
Air compressors make me nervous (I always wear sound-cancelling headphones around them and any pneumatic tools), so in the past I preferred to buy cans of spray paint for my paint jobs that needed something smoother than a brush or roller. Or I would bring something large over to Dad's house, and he would kindly paint it for me with his spray can hooked up to an air compressor.
But this kitchen project was my baby, and I decided it was time to put my big girl pants on and learn how to use a spray gun! It's surprisingly easy, folks. I will say, though, there are a lot of parts and pieces that need cleaning, and when you're painting all day, the paint will dry on the can and require lots of elbow grease, and sometimes paint thinner, to remove later on. It's also confusing reassembling the parts if you're not familiar with how they go together. But the actual painting part is easy. The worst part is how physically tiring it can be lifting your arm while holding a paint can to paint. It's a good isometric exercise, for sure!
For our setup, we had a pneumatic spray gun that required an air hose and air compressor to spray the paint. The first day we were held up by waiting for the air compressor to power up after a while of painting, which was a bit of a time waster. So for the second day of painting, we used two air compressors! If you're renting equipment and trying to do this all in one day, keep that in mind when selecting an air compressor. You'll want one with a higher capacity in order to work quickly.
I was very interested in the hose-free sprayers that are on the market these days, but since my dad already owned a pneumatic setup, I decided to go that route because, hello, you can't beat free! But I've heard good things from my father-in-law and other bloggers about the spray guns that don't use hoses or air compressors, though they will be heavier and more difficult to lift.
Something I noticed when diluting our semi-gloss paint was that the finish ended up being a little less shiny than it was when I rolled or brushed it onto the lower cabinets. Because of this, we tried to dilute the paint as little as possible, but we still had to add quite a bit of water. This apparently can be a problem when working with water-based paints, but isn't an issue when working with oil-based paints. I still think the easy clean-up and low odor of the water-based paint is worth it!
Hardware is the jewelry of the kitchen, so it deserves the same attention at selecting an engagement ring. Think I'm kidding? I'm not. In the market to get engaged? Eh, you might want to disregard that statement. I'm afraid most women might not be as apathetic about ring bling as me and might not care as much about their kitchen hardware as I do! But the point is, new hardware will make a huge statement in a kitchen and sets the feel for the accessorizing to come later.
I love that brass is coming back into kitchen fashion, and it works well with the existing brass fixtures in my 1959 home. So I selected these brass bar drawer pulls which I had planned on installing on every door and drawer in the kitchen. Except when I added up the cost, it was way out of my budget! $660, folks! Yeah, I had to make some adjustments. I selected smaller bar pulls for all of the drawers, but from the same manufacturer, and then I went to the hardware store and found small brass door pulls that looked like they would coordinate with the drawer pulls. They don't match exactly, but for a savings of $452, I think I can deal with it. Now that we've been using them, I can say that I really like the variety and prefer this look of mixing knobs and bar pulls rather than having bars on all the doors and drawers.
For my drawers, I kept in mind the dimension of the existing holes when selected new hardware. To make less work for myself, I wanted to keep the same center dimension (the distance from hole to hole), which fortunately are set standards that are easy to match from manufacturer to manufacturer. That was a huge relief!
As far as hinges are concerned, I didn't want them to make a design statement, though I can appreciate that style in kitchens, like this one I linked on my kitchen Pinterest board. So I selected hinges in the same color as the paintwhite for the upper cabinets and black for the lower cabinets. It's possible to do hidden hinges, but that would have been more work than we really wanted to get into, with routering holes and whatnot, so we just decided to stick with the style of hinges that were originally on the doors.
Credits // Author and Photography: Mandi Johnson. Photos edited with Spring of the Signature Collection.
Hi, guys! It's Mandi hereso excited to share this first peek into our newly remodeled kitchen! When we were house hunting three years ago, it was difficult to find a home in our price range that had a large kitchen and dining room, but that was number one on my shopping list. We ended up finding just the homea small, mid-century ranch with a good portion of its square footage dedicated to making food and eating it. Perfect for our modern family! Of course, I didn't really like anything about the kitchen besides its layout, and for a while it was really difficult for me to enjoy being in there without wishing it was different. We didn't have the money for a renovation, but that didn't stop me from dreaming about it with every pancake I flipped!
Quite frankly, it wasn't until I faced an unexpected battle with cancer that my priorities completely shifted, and I learned to develop blind spots towards the areas in my home I had wanted to change and simply focus on enjoying the people in our home instead. Now that we finally have a chance to make changes in our home, we've been able to think long and hard about each decision and go into the project with a healthy attitude, understanding that this renovation is a fun thing we get to do to make our home prettier, but it's the food and fellowship that really makes our kitchen a wonderful place to be.
The biggest change our kitchen underwent was the refinishing of the cabinets. I can't believe how different this space feels and the amount of light that bounces around in there now! It's like a whole new kitchen!
If you've been itching for a change in your own kitchen, I'd wager that painting your cabinets could give you that fresh face you want, without the hefty cost of all new fixtures. It was a little scary, in the throws of the renovation, when the cabinets had been ripped off the wall, the countertop was missing, and the walls needed patched. Maybe it was just living with a busy husband, active toddler, and no sink or stove. But I think a little part of the scary factor was the fact that this was such a BIG job, and I was having commitment issues. Did I choose the right colors? Would I miss the wood cabinets? Should we have just sprung for new cabinets after all?
Now that I'm looking at these before and after photos, I can't believe I even questioned refinishing our cabinets! We saved so much money by keeping our current cabinetry, but the refinishing definitely breathed new life into our entire kitchen. Check out our process below, and I'll share some tips too!
Our simple plywood cabinets were presumably constructed by the previous owner, judging by the not-so-amazing quality of the construction. As we began taking off the sticky doors, I wondered if we were making a mistake in putting time and money into these chipped and crooked cabinets. But working on a tight budget, and not wanting to over-improve our home for the neighborhood, I decided to stick with the plan of painting them. It would just require quite a bit of attention and wood filler. Did I mention lots of wood filler? Yeah. We used two tubs of wood filler for this whole job. More than I've ever used in my entire life.
Selecting a Paint Finish
I knew that I wanted a darker color on the bottom and white on the top of my cabinets, because I liked the interest that the difference in color adds to a space and was really itching to bring more light into our dreary kitchen. But I wasn't sure what kind of paint to get. I was worried about getting a high-gloss paint because of brush strokes showing more easily with the reflected light, but I liked the idea of the cabinets being really easy to wipe clean with a semi-gloss finish. Plus, I'll take all the reflected light I can get.
In the end, I decided to get Benjamin Moore's ADVANCE paint because it's so thick and settles nicely after brushing, so that brush strokes become less noticeable than they would be with a lower quality paint. Because we were spray painting the doors, and there would be no brush or roller texture to be seen on them, I had no qualms about getting a semi-gloss paint finish. I can attest to the fact that they're very easy to wipe clean, though I'll warn you that fingerprints show up so easily, so we're cautious about closing the doors using the knobs instead of our hands.
The top cabinets have untinted white paint, and the lower cabinets have Benjamin Moore's Black Panther, which is like a dark charcoal gray, but not quite black. I decided having no color on the cabinets would age the best and work with any color scheme in the future. Sure, yellow was tempting, but I'm glad I kept it safe with the Black Panther! And the whiteOh, it's so bright and beautiful!
Planning a Timeline
Something that I didn't do in our project, that I wish I would have, was to create a timeline. We had friends and family help out at times, and when they were contributing their own tools to the project, it was a little frustrating waiting days to pick up where we left off because of waiting for their availability. You know the old saying, beggars can't be choosers? It's so true! But I think that my own sanity would have benefited from creating a schedule for work days and what we had planned to accomplish. Our entire kitchen was ripped apart, so in between work days, it was hard to do anything in our home, much less eat anything. If we had consulted with helpers to see their availability and coordinated with them to create a schedule, I'm sure I would have had a much better time with the process, looking at a schedule and seeing an end in sight, and also knowing for sure that people knew which days they were going to be coming over to help, and I could count on it.
Here's how we ordered each aspect of the cabinet refinishing:
Day One: Empty cabinets and drawers and organize contents into boxes and onto folding tables throughout the houseThis took one evening with two people.
Day Two: Take down upper cabinets (optional), remove cabinet doors and drawers, remove hardware, sand away the previous finish, fill holes and chips with wood filler, let wood filler dry, sand down again, do another coat of wood filler, then sand again until smoothThis took one long afternoon and late night with three people.
Day Three: Taping off the drawer sides and insides, spray painting with primer, wet sanding the primer, and adding another coat of primer to all doors and drawersThis took one morning and afternoon with two people.
Day Four: Taping off the inside of the lower cabinets, priming the cabinet faces with two coats of primer, and painting with two coats of paintThis took one evening and late into the night with two people, primarily waiting for paint to dry between coats.*
Day Five: Spray painting two coats of paint on all the doors and drawers and moving inside the garage to dry on wax paperThis took one morning and afternoon with two people.
Day Six: Hanging upper cabinets and adding new hardware to doors and drawersThis took one evening with three people.
Day Seven: Hanging doors with new hingesThis took one evening with two people. We also had old latches to add inside the cabinet doors.
*It's important to allow one week after painting before hanging doors and replacing drawers. If you use them before the paint has cured, I guarantee you will have something stick to the paint and then pull it away, ruining your fresh paint job!
Supplies for Refinishing Our Kitchen Cabinets
Materials:
-1 gallon tinted primer (to use under dark paint)
-1 gallon regular primer
-1 gallon untinted, white semi-gloss paint (Benjamin Moore's ADVANCE)
-1 gallon Benjamin Moore's ADVANCE Black Panther semi-gloss paint
-sandpaper120 grit, 180 grit, and 400 grit wet/dry
-latex wood filler
Tools:
-rags
-buckets
-palm sander
-spray gun (borrowed from my dad)
-air compressor (borrowed from my father-in-law)
-power drill with drill bits
-breathing masks
Preparing for Painting
To prepare the cabinets for painting, we removed all of the doors, drawers, and hardware and sanded off the finish of the wood. I used 120 then 180 grit sandpaper for this, ending up with smooth, raw wood ready for priming.
Because I planned to replace the hardware, I filled in all of the door knob holes. To do this, I applied wood filler with my finger, shoving it deep into the holes on the front and back of the doors, then smoothed away the excess wood filler with a damp rag. When it dried completely, I sanded the area that was filled with 180 grit sandpaper. Most areas needed additional wood filler because of shrinkage into the holes, so I repeated the process until the surface was perfectly smooth and undimpled.
Although we were using new hinges with holes that matched the old ones, we also decided to fill in all of the hinge holes. We did this because we couldn't be sure that every door was drilled the same, and we were certain when rehanging the doors that it would be quite a struggle to get everything lined up evenly using the new holes. We decided that starting with fresh, undrilled doors would be best, and it worked out well in the end.
The drawers were using new hardware that matched the holes from the old hardware, so thankfully we didn't have to fill in any drawer holes! But we did use masking paper and masking tape to protect the area around the door face from paint. We figured, why waste paint on doing the whole drawer when you only see the face?
Proper Painting Steps
After all of the drawers and doors were prepared for painting, it was time for the fun to begin! We had two people working (my dad and me), with one spray painting and the other one setting up sawhorses and lumber to create a drying area. I moved drawers and doors that were ready to be painted or freshly painted while my dad sprayed them. We worked on a warm, sunny day, so the paint dried quickly.
After the primer had set up, I got to work on wet sanding them. Wet sanding is an important step in painting that is a bit tedious, but definitely worth it! When priming, the little hairs of the wood become raised, giving a bit of a rough and bumpy texture to the finish of the wood, even though it has been sanded prior to painting. Wet sanding knocks down that rough texture while simultaneously smoothing out that grainy texture that shows through when painting over wood. It leaves you with an unbelievably silky surface for the final coats of paint.
I used 400 grit wet/dry sandpaper in the sheets shown in the image below. I cut the sheets into quarters so they were more manageable. Then I would dunk the sandpaper into the water and rub the primed surface with plenty of water to go around. Then I would dunk the sandpaper back into the water to keep the paint from clogging up the sandpaper. One quarter sheet of sandpaper usually would last me through two doors or three drawers.
After wet sanding, the primer on the corners and edges of the wood had been sanded off, so we gave the doors and drawers another coat of primer after they had been rinsed and dried.
As you can imagine, carefully priming, then wet sanding, then priming again took quite a bit of time! In fact, it took an entire morning and afternoon. We opted not to paint into the evening because that's when the bugs are more prevalent and apt to ruin a paint job.
Using a Spray Gun
Air compressors make me nervous (I always wear sound-cancelling headphones around them and any pneumatic tools), so in the past I preferred to buy cans of spray paint for my paint jobs that needed something smoother than a brush or roller. Or I would bring something large over to Dad's house, and he would kindly paint it for me with his spray can hooked up to an air compressor.
But this kitchen project was my baby, and I decided it was time to put my big girl pants on and learn how to use a spray gun! It's surprisingly easy, folks. I will say, though, there are a lot of parts and pieces that need cleaning, and when you're painting all day, the paint will dry on the can and require lots of elbow grease, and sometimes paint thinner, to remove later on. It's also confusing reassembling the parts if you're not familiar with how they go together. But the actual painting part is easy. The worst part is how physically tiring it can be lifting your arm while holding a paint can to paint. It's a good isometric exercise, for sure!
For our setup, we had a pneumatic spray gun that required an air hose and air compressor to spray the paint. The first day we were held up by waiting for the air compressor to power up after a while of painting, which was a bit of a time waster. So for the second day of painting, we used two air compressors! If you're renting equipment and trying to do this all in one day, keep that in mind when selecting an air compressor. You'll want one with a higher capacity in order to work quickly.
I was very interested in the hose-free sprayers that are on the market these days, but since my dad already owned a pneumatic setup, I decided to go that route because, hello, you can't beat free! But I've heard good things from my father-in-law and other bloggers about the spray guns that don't use hoses or air compressors, though they will be heavier and more difficult to lift.
When using a spray gun, you will need to dilute the paint. There is no set-in-stone formula for this, since every kind of paint is of a different consistency, but what you're aiming for is a runny consistency that doesn't cling to the paint stirrer when you lift it from the can. When working with oil-based paint, you need to dilute the paint with paint thinner. We were able to use water because we were using latex paint.
Something I noticed when diluting our semi-gloss paint was that the finish ended up being a little less shiny than it was when I rolled or brushed it onto the lower cabinets. Because of this, we tried to dilute the paint as little as possible, but we still had to add quite a bit of water. This apparently can be a problem when working with water-based paints, but isn't an issue when working with oil-based paints. I still think the easy clean-up and low odor of the water-based paint is worth it!
After painting all of the cabinets with two coats of paint, we brought them into our garage which had been cleared out to make room for sawhorses and lumber stretchers. We laid out strips of wax paper to rest the cabinet doors (the inside of the doors face down) for a few days while the paint cured. If you're in a high humidity area, though, you'll want to let the paint cure indoors where there is better temperature/humidity control.
Selecting Hardware
Hardware is the jewelry of the kitchen, so it deserves the same attention at selecting an engagement ring. Think I'm kidding? I'm not. In the market to get engaged? Eh, you might want to disregard that statement. I'm afraid most women might not be as apathetic about ring bling as me and might not care as much about their kitchen hardware as I do! But the point is, new hardware will make a huge statement in a kitchen and sets the feel for the accessorizing to come later.
I love that brass is coming back into kitchen fashion, and it works well with the existing brass fixtures in my 1959 home. So I selected these brass bar drawer pulls which I had planned on installing on every door and drawer in the kitchen. Except when I added up the cost, it was way out of my budget! $660, folks! Yeah, I had to make some adjustments. I selected smaller bar pulls for all of the drawers, but from the same manufacturer, and then I went to the hardware store and found small brass door pulls that looked like they would coordinate with the drawer pulls. They don't match exactly, but for a savings of $452, I think I can deal with it. Now that we've been using them, I can say that I really like the variety and prefer this look of mixing knobs and bar pulls rather than having bars on all the doors and drawers.
For my drawers, I kept in mind the dimension of the existing holes when selected new hardware. To make less work for myself, I wanted to keep the same center dimension (the distance from hole to hole), which fortunately are set standards that are easy to match from manufacturer to manufacturer. That was a huge relief!
As far as hinges are concerned, I didn't want them to make a design statement, though I can appreciate that style in kitchens, like this one I linked on my kitchen Pinterest board. So I selected hinges in the same color as the paintwhite for the upper cabinets and black for the lower cabinets. It's possible to do hidden hinges, but that would have been more work than we really wanted to get into, with routering holes and whatnot, so we just decided to stick with the style of hinges that were originally on the doors.
So that's where we're at! I'll also be sharing about how we reconfigured our cabinets to get a fresh look, installed our own butcher block countertop, and dealt with the brick wall on the other side of the room. I can't wait to show you the grand reveal! Let me know if you have any questions about refinishing our cabinets, and I'll be happy to answer in the comments below! -Mandi
Credits // Author and Photography: Mandi Johnson. Photos edited with Spring of the Signature Collection.
Refinishing Kitchen Cabinets - A Beautiful Mess
Thanks for commenting! Comments are moderated (everything constructive is approved), so they may take a bit to appear. We reply to comments daily, so please check back!
Kitchen Renovation Reveal - A Beautiful Mess
but it never felt real until our kitchen renovation. -Refinishing Kitchen Cabinets-Cleaning, © A Beautiful Mess. RSS
Refinishing Kitchen Cabinets A Beautiful Mess | Fashion ...
How refinish kitchen cabinets « interior design, How refinish kitchen cabinets. learn paint refinish kitchen cabinets.. Kitchen cabinet
kitchen cabinet refinishing | kitchen touch up
The Kitchen Touch Up Process Enjoy beautiful wood cabinets without dust or mess, in just 24 hours and at a fraction of the cost of traditional wood refinishing.
Kitchen Cabinet Refinishing; #1 Kitchen Cabinet ...
Kitchen Cabinet Refinishing; Whether it is refinishing your bath and tile with our high quality coatings or installing a beautiful acrylic bath system,
How to Refinish Kitchen Cabinets: 10 Steps (with Pictures)
How to Refinish Kitchen Cabinets. Three Parts: Stocking Up Prepping the Surface Priming and Painting. Doing finishing work on your kitchen is a great way to liven up
Kitchen Cabinet Refacing | Refinishing & Resurfacing ...
with less mess and less hassle. already recommended home depot for kitchen refinishing to finished product is beautiful and looks like new custom cabinets
Refinishing Kitchen Cabinets : How to Refinishing Kitchen ...
Refinishing Kitchen Cabinets Ideas,Refinishing Kitchen Cabinets,Refinishing Kitchen Cabinets Kitchen backsplash designs really give your kitchen a beautiful
Refinish Kitchen Cabinets for Kitchen Remodeling ...
Pittsburgh Wood Renewal Revolutionary Process like-new wood floors and cabinets without dust, mess, Mess and Cost of Refinishing Floors or Cabinets.
How to Refinish Kitchen Cabinets - Kitchen Design Angel
but the results can be truly beautiful! HOW TO REFINISH KITCHEN CABINETS COVERED WITH LAMINATE: 1) the clean-up is more of a mess,
Travelling is my life
ConversionConversion EmoticonEmoticon