Plastic or Wood or "something" Kitchen Drawers Gone Bad? We Have a Solution!
I'm letting you know that with the directions you provide, the replacement drawer & slide system installed perfectly. I'm sure I'll be ordering more as the unit has another 12 plastic drawers.
Thanks Dan
http://www.thewoodworksinc.com/cabinet_mod/drawer-slide-system.php
http://www.thewoodworksinc.com/cabinet_mod/pantry-drawer-slide-install.phphttp://www.thewoodworksinc.com/cabinet_mod/drawer-front-transfer-installation.php
NEW QUALITY WOOD DRAWER BOX AND NEW FULL EXTENSION SLIDES,
ALL FOR $100 WITH FREE SHIPPING. A LITTLE HANDY WORK INSTALLING AND YOU HAVE A SUPERB SOLUTION.
Armstrong or Triangle Pacific kitchen plastic drawer replacement options in quality wood, dovetailed construction. Prefinished with replacement track system. Easy to install.
We have not found original type plastic drawers available anywhere; BUT, we have an option.
NEW WOOD DRAWER BOX INTERNET SPECIAL $60
BALTIC PLYWOOD CUSTOM CABINET QUALITY DRAWER BOXES
INTERNET SPECIAL:
$60 EACH
The typical cost for the new STANDARD DRAWER BOX is $60 each.
The new box includes a clear lacquer pre-finish and arrives preassembled with dovetailed joints with FREE SHIPPING.
INTERNET SPECIAL any "under counter" standard drawer height box height of 2 1/2", 3", 3 1/2", or 4" and up to 24" wide for under counter drawers.
Standard box front/back depth is 21" or 18" with options available.
Slightly more for larger or deeper requirements.
Plastic drawers are 18" rated.
Box Standard Height: 2 1/2", 3", 3 1/2", 4" and taller with upcharge
Add $10 for Special taller heights are limited to 5, 6, 7, 8, 9, 9.5, 10
Non Standard Special Drawer Box: any size over 5 " high or 24" wide.
Add $10 for extra height. Special taller heights are limited to 5, 6, 7, 8, 9, 9.5, 10
Add $10 for extra width.
Add $20 for 1/2" bottom to support heavy contents any size.
Add $10 Rollout Box for Pull-out Trays:
A cabinet pull-out tray is the same drawer box with no cabinet drawer face and with the box front having the handle scoop out area.
Add $20 High Back Rollout for Special Pantry Pull Out Trays:
High Back Trays are basically no different, but are usually much larger, longer, or wider than kitchen drawers to keep taller items from tipping over the back. Extra wide charges also apply for over 24".
Order back height desired UP TO 5" and the front is always 2 1/2"
½ THICK BACK, FRONT & SIDES WITH ¼ BOTTOMS (recessed 1/2")
DOVETAILED, ASSEMBLED AND CLEAR UV FINISHED
In Heights listed by up to Width in 1/8 and Front/Back Depth in 1/8.
Just transfer your drawer front and slide hardware and the drawer is better than new.
Sizing: Requires client to accurately measure (WE MUST STRESS ACCURATELY!) width and height of cabinet opening to narrowest +/-1/16" accuracy.
WE MUST STRESS YOU HAVE TO CONFIRM THAT YOU ARE PROVIDING THE CABINET OPENING. IF SO, WE'LL RESIZE FOR ALLOWANCES FOR OUR SLIDE SYSTEM.
See our special soft close, full extension metal slide system to support these drawers. Why not replace it all?
- Available in 18" and 21" slide lengths for cabinets rated as 21" vanity or 24" kitchen.
- Undermount Heavy Duty Soft Close Drawer Glides
- Rated For Up To 175lbs
- Soft Close Feature Makes It Impossible For The Drawer To Slam
- Comes with Drawer Mount Clips installed on drawer
- Comes with Rear Adjustable Mounting Brackets
$40 per slide when ordered with box with FREE SHIPPING.
SLIDE SYSTEM FOR NEW WOOD KITCHEN DRAWER BOXES
WHAT TO SPECIFY OF CHOICES AVAILABLE:
NOTE: YOU CAN DRAG "FROM HERE" DOWN "TO HERE", COPY AND PASTE THIS ORDER FORM INTO YOUR BROWSER'S EMAIL, FILL IT OUT, AND EMAIL IT TO US AT web@thewoodworksinc.com
You will be sent a Money Request Email Invoice for payment by your favorite credit card.
Normally ship in about 10 business days.
| YOUR INFORMATION: | |
| Company Name | |
| Your Name | |
| Email Address | |
| Address | |
| City/State/Zip | |
| Day Phone # | |
| DRAWER BOX SPECIFICATIONS: | |
| DRAWER BOX TYPE | |
| Drawer Box | yes |
| Roll Out Tray | |
| High Back Rollout | |
PRE ASSEMBLED |
|
| Dovetailed | Yes |
| WOOD SPECIES | |
| 1/2" Baltic Birch | Yes |
Pre Finished Clear |
|
| UV Coated | Yes |
NOTCH FOR SLIDE |
|
| Bottom Mount | Yes |
INCLUDE SLIDE w/ REAR BRACKETS |
|
| Full Extension | Yes |
BOTTOM THICKNESS OPTION |
|
| 1/4" Presumed | Yes |
| 1/2" for Strength | |
DOVETAIL DRAWER BOX REQUIREMENTS WITH OUR SLIDE SYSTEM GIVE CURRENT CABINET OPENING SIZES |
|||||||||||||||
WE will resize -1"+ for slide system |
18 or 21" |
WE will resize -5/8" for slide system |
BASIC | STYLE |
SPECIAL |
MATERIAL |
|||||||||
2 2.5 3 3.5 4 |
in |
||||||||||||||
| DON'T CONFUSE SEQUENCE | BASIC PRICE PLUS OPTIONS | ||||||||||||||
Qnty |
HEIGHT Cabinet Opening |
|
WIDTH Cabinet Opening |
Stan- |
Roll |
High |
Extra |
Extra |
1/2" |
Baltic NO Finish |
Baltic |
Birch White Poplar |
Maple Soft |
Aspen |
TOTAL |
1 |
4 |
18 |
14 1/2 |
$60 |
+$10 |
+$20 |
+$10 |
+$10 |
+$20 |
($5) |
$5 |
$5 |
$10 |
$15 |
|
| SLIDE SYSTEM REQUIREMENTS: Cabinet Opening less 5/8" for this slide | ||||
| Full Extension, Bottom Mount, 21" reach or 18", Front Clips pre-installed and with Rear Clips, Easiest to Install |
||||
QUANTITY |
SETS |
$40 | 18" or 21" | |
DOVETAIL DRAWER BOX REQUIREMENTS WITH-OUT- OUR SLIDE SYSTEM GIVE ACTUAL CURRENT DRAWER BOX SIZES |
|||||||||||||||
Choose |
18 or 21" |
in |
BASIC | STYLE |
SPECIAL |
MATERIAL |
|||||||||
| DON'T CONFUSE SEQUENCE | BASIC PRICE PLUS OPTIONS | ||||||||||||||
Qnty |
HEIGHT Current Box |
|
WIDTH Current Box |
Stan- |
Roll |
High |
Extra |
Extra |
1/2" |
Baltic NO Finish |
Baltic |
Birch White Poplar |
Maple Soft |
Aspen |
TOTAL |
1 |
4 |
18 |
14 1/2 |
$60 |
+$10 |
+$20 |
+$10 |
+$10 |
+$20 |
($5) |
$5 |
$5 |
$10 |
$15 |
|
WOOD SPECIE NOTICE: BALTIC BIRCH is 1/2" thick of solid lumber plys with no voids and is the superior form of plywood. Dovetail construction assembled. Prefinished clear. Ready out of the shipping carton.
PAYMENT: We will confirm what you want and final pricing by return email.
This means you advise us what you want, from our experience we clarify any aspects, we then SEND you a Money Request email for the confirmed proper amount. You then can pay with any of the above cards.
ORDER FEE WITH FREE SHIPPING: NO fee for orders of 3 or more drawers with or without slides.
No minimum order but there is a $30 packaging and handling fee PER ORDER for less than 3 drawer boxes.
FREE SHIPPING to the 48 Contigous States.
SHIPPING: Your order will 99% of time be turned over to UPS for shipment direct to you within 7-10 business days.
OPTION: $60 EACH FOR 1/2" BALTIC BIRCH PLYWOOD DOVETAILED PREASSEMBLED PREFINISHED and DELIVERED, PER YOUR SIZES, -BUT- WITHOUT SLIDE SYSTEM -BUT- WITH OUR "KIT" $20
PLASTIC DRAWER REPLACEMENT with KIT: $80
- Cabinet Quality Drawer Box of 1/2" Baltic Birch, preassembled and prefinished.
- Drawer $60 drawer box
plus $20 "Kit" hardware or $80 total to RE-USE your existing center track system, but we can't guarantee it will work because of such a variety of tracks that seem to exist. - Kit includes plastic "C" clip for fitting to back of wood drawer to use with existing track, and pair of wheels for front for drawer to roll on.
- One drawer minimum.
- ANY SIZE UP TO 5" HIGH AND 24" WIDE
- Specify your required measurements of boxes (not openings) needed
- Drawer $60 drawer box
IF YOU ARE TRYING TO RETROFIT OUR WOOD BOXES TO YOUR PLASTIC T SLIDE TRACK:
- Be sure your track still inside cabinet is in good shape.
- Your existing track has a width of NORMALLY 3/4". IF 1" we need to know what it actually is.
- We encourage you to remove the track in order to get accurate measurements.
- New drawer will be 18" deep front/back, same as plastic ones.
- The back of the wood drawer receives a specialty sized drawer track clip that can be used with the pre-existing plastic track still inside the cabinet. $10 per clip with screws. Part of Kit. Miinimum of 3 such kits if ordered by themselves.
- We now supply the pair of wheels for mounting inside the front face frame for $10 per pair. Part of the $20 kit. We no longer supply the brown nylon "L" glides for the inside of the cabinet face frame left & right for drawer to slide on. The wheels are better. Miinimum of 3 such kits if ordered by themselves.
- IF client has more than one plastic drawer, and one fails, it is strongly recommended they replace all that are used much since the rest will likely fail shortly. Plastic ages.
- Easy enough to install but clumsy. At most we advise readjustment of height of back glide might be required to get the drawer box to hang level.
- Drawer front and handle transfer and alignment is up to the client. Generally center left/right and up/down. Drill holes thru front of new box and attach actual drawer front with screws from behind. If you have a handle, then drill thru the old front thru the box and install the handle with a longer bolt.
- Any slide system hardware consumes space. If you want to convert to a metal side roller then you must advise us AND then provide the size of the actual box you need.
- IF you do not have the plastic track above the existing plastic drawer, you must advise us.
- IF you have a wheel on the back of the plastic drawer, you must advise us. We can not supply an alternative to the wheel structure.
JUST FOR YOUR INFORMATION ABOUT PLASTIC DRAWERS:
WE DO -NOT- SUPPLY PLASTIC DRAWERS & KNOW OF NO SOURCE FOR THEM.
The entire website/s of www.TheWoodWorksInc.com and www.TheWWs.com and www.TheMovingClaims.com are copyrighted and should not be used by others in the trade in any form without explicit written permission.
Travelling is my life
ConversionConversion EmoticonEmoticon